Pool decks that stay safe underfoot and look rich
Pool Deck Paver Sealing in Arlington Hills, FL
A free pool deck sealing estimate for your Arlington Hills home starts with one call to (904) 901-6561.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Is pool deck paver sealing available at my Arlington Hills home, and how soon?
Pool deck paver sealing is available across Arlington Hills, FL, and a local contractor writes back within 1 business day, often well before. The estimate is free and booking is optional. To get started, call (904) 901-6561.
Picture the deck beside your pool with its color deep and even, the joints full and no green film where the splash lands. Bare feet, wet footprints and chlorine set the rules for this job, so the finish matters as much as the color. Tell the contractor how much shade falls on the deck and where guests walk when you send a quick request.
Which Arlington Hills streets and nearby towns can get pool deck sealing?
A local contractor covers Arlington Hills and the towns around it, and each place below has its own page of local notes. Not sure your street counts? A call to (904) 901-6561 settles it.
- Brentwood
- Arlington
- Panama Park
- Fort Caroline
- Royal Terrace
- San Marco
- Southside
- Sandalwood
- Paxon
- Highlands
- Oceanway
- Riverside
- San Jose
- San Pablo
- Atlantic Beach
- Cedar Hills
- Beauclerc
- Dinsmore
- Jacksonville Beach
- Argyle Forest
- Mandarin
- Baymeadows
- Whitehouse
- Ponte Vedra Beach
- Bellair-Meadowbrook Terrace
- Palm Valley
- Yulee
- Fruit Cove
- Lakeside
What makes a pool deck harder on sealer than a driveway or a patio?
Water never leaves a pool deck alone. Jax Exterior Cleaning lists splash-out, pool chemicals and bare feet as the main wear on pool surrounds, and Stallone's Pro Wash calls pool deck pavers a priority because constant moisture speeds their decline. Sealer slows that moisture down. To see how your own deck is holding up, call (904) 901-6561.
Ground and air add to it here. About 33 percent of ZIP code 32277 is water, since the ZIP holds 3.566 square miles of water against 7.159 of land, according to zip-codes.com. Damp air keeps lanai floors from drying fast. Mention how often your deck stays wet when you send a quick request.
Which sealer finish is safest to walk on around a pool?
Choose footing first and shine second. Unilock says high gloss sealers can be slippery when wet and calls matte the safer option, and Jax Exterior Cleaning says its pool deck sealer is chosen so the surface will not turn slick. Stallone's Pro Wash sells four looks, listed below. To compare samples on your own pavers, call (904) 901-6561.
Natural matte
Stallone's Pro Wash says it protects without shine and keeps colors close to how they looked new. That makes it the usual starting point for wet feet.
Wet look satin
The same color boost as high gloss with a softer sheen, per Stallone's Pro Wash. Ask for a test patch and walk on it wet.
Wet look high gloss
The richest color, and the one Unilock warns about for slipperiness. It suits dry areas such as a front walk better than the splash zone.
Does chlorine and splash water shorten how long a coat lasts?
Yes, and the numbers show it. Safe Touch calls two to three years typical for sealing in this county and says full sun, pool chlorine and storm washed joints can pull that to about two years. Jax Exterior Cleaning reports 2.5 to 3 years locally, while Unilock's general guide runs three to five. A pool deck usually sits at the short end. To plan your reseal date, send a quick request.
A simple test helps between visits. Stallone's Pro Wash says a coat is due when water stops beading and soaks in quickly. Sprinkle a little on a dry day near the pool edge and watch it. If you are unsure what you see, call (904) 901-6561.
What stains and growth show up on a lanai or screened pool deck near the river?
Shade is the main cause. Jax Exterior Cleaning lists algae, mildew and weeds as the usual results of shade and dampness, and Safe Touch says moisture builds up on north and east sides of a house in this humid subtropical county. A lanai that faces one of those sides stays green longest. When you send a quick request, point out the corners that never dry.
Oaks add their own marks. Safe Touch says live oaks leave tannin stains on concrete and that oak pollen coats surfaces from March through May, so a deck under branches gets dull twice a year. Iron in well water or reclaimed irrigation also leaves orange rust, and Safe Touch says those marks need a rust treatment, not more pressure. To flag a rust spot near a sprinkler head, call (904) 901-6561.
What is the pool deck sealing process from start to finish?
Five stages cover most jobs, and each depends on the one before it. The order matters because sealer locks in whatever is left under it. To walk through the stages for your pool, call (904) 901-6561.
1. Walk the deck
The contractor notes sunken pavers, low joints, old sealer, rust spots and the places where water sits.
2. Wash and treat
Algae and stains get a matching cleaner. Stallone's Pro Wash says cleaning always comes first, since sealing over dirt or algae shortens the life of the coat.
3. Sand the joints
Stallone's Pro Wash packs in kiln dried sand and skips polymeric sand, citing rain and humidity. Wet sanding compacts it.
4. Let it dry
Unilock says a few hours in sun and about 24 hours in shade. Stallone's Pro Wash allows damp sand but no standing water.
5. Seal in one session
Unilock advises sealing the whole area in one session after a test patch, with a dry roller catching streaks. Puddles get rolled out so the finish dries evenly.
What does pool deck paver sealing cost in Arlington Hills?
Safe Touch lists $1.75 to $3.25 per square foot for a full clean, sand and seal, and that range is a solid guide to a pool deck here. Stallone's Pro Wash lists cleaning from $0.22 and sealing from $1.90, and says size, paver type and joint sand set the final number. For a figure written for your deck, send a quick request.
Extras can move the price: failed sealer to strip, large areas of low joints and heavy stains. Safe Touch says strip and reseal work costs more. Ask for each as its own line, then call (904) 901-6561 to compare quotes side by side.
| Deck size | Typical layout | Clean plus seal from $2.12 per sq ft | Clean, sand and seal, $1.75 to $3.25 |
|---|---|---|---|
| 400 sq ft | Small deck around a plunge pool | $848 | $700 to $1,300 |
| 700 sq ft | Standard deck on one side of a pool | $1,484 | $1,225 to $2,275 |
| 1,000 sq ft | Deck that wraps the pool | $2,120 | $1,750 to $3,250 |
| 1,400 sq ft | Wrap around deck with a lanai floor | $2,968 | $2,450 to $4,550 |
No page found for Arlington Hills gives one price for this exact job, so the table is built from published pieces. Stallone's Pro Wash, a Northeast Florida company, starts cleaning at $0.22 a square foot and sealing at $1.90, which adds up to $2.12 as a starting point. Safe Touch, another Northeast Florida company, lists $1.75 to $3.25 per square foot for a full clean, sand and seal. The contractor names the real price after looking at the surface.
What should a pool deck sealing quote say before I agree?
Ask for these points in writing, and a quote becomes easy to compare. Each one traces back to the sources named on this page. When you are ready, send a quick request.
- The finish, with a test patch you can step on wet
- Whether the sealer is water based or solvent based, since Unilock says solvent based needs fully dry pavers and joints
- How joint sand is handled and whether polymeric sand is used
- What happens if rain or damp air pushes the date back
- How many hours the deck must stay off limits
- Any strip and reseal work priced as its own line
What do sealed pool decks look like around Arlington Hills?
Questions about pool deck paver sealing in Arlington Hills
How much to seal a pool deck?
No published rate is written only for pool decks, so use the pieces that exist. Stallone's Pro Wash starts cleaning at $0.22 a square foot and sealing at $1.90, and Safe Touch lists $1.75 to $3.25 per square foot for a full clean, sand and seal. A 700 square foot deck lands between about $1,225 and $2,275 on the Safe Touch range.
Is it good to seal pavers in Florida?
Yes, when the pavers have faded or the joints keep emptying. Jax Exterior Cleaning says heavy summer rain, humidity and strong sun wear a surface hard in this part of the state. Stallone's Pro Wash adds that pool deck pavers are a priority, since constant moisture speeds their wear.
How long do paver sealers last?
Expect two to five years, and plan on the short end beside a pool. Stallone's Pro Wash gives two to five years for Northeast Florida, and Safe Touch says full sun, pool chlorine and storm washed joints can bring that down to about two years.
Why is paver sealing so expensive?
The sealer itself is the smaller part of the bill, and prep is the larger part. A pool deck needs washing, stain treatment, new joint sand and enough dry time before the coat goes on. Safe Touch notes that strip and reseal work costs more when old sealer has failed.
Will a sealed pool deck be slippery when wet?
It can be if the sheen is high. Unilock says high gloss sealers can turn slippery when wet and calls matte the safer pick. Jax Exterior Cleaning says it uses a sealer suited to pool areas. Ask the contractor which finish is planned and test a small patch with wet feet.
How soon can the pool be used again after the deck is sealed?
Plan on staying off the deck for 24 to 48 hours. Jax Exterior Cleaning says foot or vehicle traffic is allowed after roughly that long, and Unilock asks for up to 48 hours of dry weather with the sprinklers off. The contractor sets the exact date.
Does a screened lanai change how a pool deck is sealed?
Mostly it changes drying. Unilock says pavers dry in a few hours in warm sun but need about 24 hours in cool shade, and a screened deck stays shaded. Shade also holds the algae that Jax Exterior Cleaning lists for damp spots, so washing gets more attention there.
Can I order pool deck sealing if I rent my Arlington Hills home?
Get the owner's okay first. Zip-codes.com shows 49.11 percent of occupied homes in ZIP code 32277 are renter occupied, and a sealer finish stays on the deck for years. After that, send a request and a contractor can quote it.
Is a pool deck sealed with the same product as a driveway?
Not always. Unilock says concrete pavers need a breathable sealer and that matte is safer where it is wet, while a driveway can take more shine. Stallone's Pro Wash lists four finishes, so the pool deck and the drive can get different ones.
Should pool deck pavers be re-sanded when they are sealed?
Yes, when joints are low. Safe Touch says storm washed joints are a common reason a coat fails early, and Stallone's Pro Wash packs in kiln dried sand before the flood coat. Full joints also keep pool water from pooling in gaps.
Other paver services for an Arlington Hills home
A pool deck often sits next to a driveway, a patio and a front walk that need care too. Each guide below stands on its own. To ask about two areas at once, call (904) 901-6561.
Ready to have your pool deck pavers sealed in Arlington Hills?
Call or send the short form and a local contractor replies within 1 business day, usually much sooner, with a free estimate.
Free, no obligation